Shenzhen Jaguar Automation Equipment Co., Ltd
Shenzhen Jaguar Automation Equipment Co., Ltd
Add to Cart
N300 Lead-free Hot Air Wave Soldering Machine N300 Automatic Intelligent Wave Welding Machine
External Flux Sprayer is a special option for Wave Soldering Machine, JAGUAR's External Flux Sprayer can choose spray position and selective partly spray location, can save flux, and adopt JAGUAR pantented "Mountain" shape Flux Recycle design, it's better for Flux recyle.
External Flux Sprayer can equiped in all Jaguar Automation's Wave Soldering.
JAGUAR N300 Lead-free Hot Air Wave Soldering Machine, as a member of Jaguar High-end series of Wave Soldering, standard configured 3 pre-heating zone, and totol pre-heating zone length up to 1450mm, pre-heating zone structure is independ control, it's better to ensure pre-heat effect, and finally to ensure soldering effect. 3 kinds of material options (316L Stainless Steel ; Ti ; Cast Iron Enamel)
| Model No. | JAGUAR N300 |
| Number of Pre-heaters | 3 |
| Pre-heater Passage | 1450mm |
| Body size | 2800(L)*1250(W)*1560(H) |
| Outside dimension | 3600(L)*1250(W)*1560(H) |
| Weight | 1000KG |
| Total/steady consumption | 19KW/5-7KW |
| Air supply | 0.5MPa |
| Preheater style | Hot air |
| Preheater consumption | 220V 6KW |
| Control method | Press key |
| Range of temp. set-point | Room temperature---300ºC |
| Preheating time | About 10-15mins for setting 150ºC |
| Solder Application | Lead-free / Sn-Pb |
| Solder pot capacity | 280KG |
| Solder pot temperature | 300ºC |
| Solder pot consumption | 380V 9KW |
| Solder temp. control method | PID&SSR |
| Wave motor power | 1KW 220V |
| Solder melting | About 120mins for setting 250ºC |
| PCB width | 50-300mm |
| Conveyor speed | 0-1800mm/min |
| Conveyor direction | L→R (R→L optional) |
| Conveyor inclination | 4-7 º |
| Flux pressure/capacity | 3-5 bar/5.2L |
1. Energy-saving, lead-free application, meet with environmental protection requirement and user friendly designed
2. Automatic power system, inverter control, automatic board in-load feature.
3. Flux sprayer using transverse Japanese spray nozzle and driving by pneumatic cylinders. PLC controlled, accurate and reliable.
4. Preheating system uses three independent temperature control so as to ensure the excellent heat preservation, temperature uniformity, temperature accuracy in ±2ºC.
5. Titanium solder fingers, high strengthened double v-groove with tin resistant