Shenzhen Jaguar Automation Equipment Co., Ltd
Shenzhen Jaguar Automation Equipment Co., Ltd
Add to Cart
N250 Lead-free Hot Air Wave Soldering Machine N250 Automatic Intelligent Wave Welding Machine
JAGUAR N250 Lead-free Hot Air Wave Soldering Machine, as a member of Jaguar High-end series of Wave Soldering, standard configured 2 pre-heating zone, and totol pre-heating zone length up to 800mm, pre-heating zone structure is independ control, it's better to ensure pre-heat effect, and finally to ensure soldering effect. 3 kinds of material options (316L Stainless Steel ; Ti ; Cast Iron Enamel)
| Model No. | JAGUAR N250 |
| Number of Pre-heaters | 2 |
| Pre-heater passage | 600mm |
| Body size | 1800(L)*1200(W)*1600(H) |
| Outside dimension | 2600(L)*1200(W)*1600(H) |
| Weight | 700KG |
| Total/steady consumption | 11KW/4-6KW |
| Air supply | 0.5MPa |
| Preheating style | Hot air |
| Preheater consumption | 220V 5KW |
| Control methodp | Press Key |
| Range of temp. set-point | Room temperature---300℃ |
| Preheating time | About 10-15mins for setting 150℃ |
| Solder application | Lead-free / Sn-Pb |
| Solder pot capacity | 220KG |
| Solder pot temperature | 300℃ |
| Solder pot consumption | 380V 6KW |
| Solder temp. control method | PID&SSR |
| Wave motor power | 500W 220V |
| Solder melting | About 120mins for setting 250℃ |
| PCB width | 50-250mm |
| Conveyor speed | 0-1800mm/min |
| Conveyor direction | L→R (R→L optional) |
| Conveyor Inclination | 4—7 º |
| Flux pressure | 3-5 bar |
| Flux capacity | 3.2L |
Configuration list : | |
| Control system | SIEMENS control system + PC |
Conveyor motor | Taiwan Sanyue 90W gear box 1:100K |
Solder Fingers | Jaguar special double v-groove thickness 1.5mm |
Solder motor | Taiwan Sanyue three phase 6 pole 0.18kw high temperature resistant |
Pneumatic cylinder | Germany FEST |
Spray nozzle | Japanese lacquer ST-8 |
Solenoid valve, regulating valve, connector, etc. | Taiwan Yadeke |
Intermediate relay | Japan OMRON MY2 MY4 |
Frequency inverter | Taiwan Delta |
Heating element | Taiwan, imported nickel wire |
Axial cross-flow blower | Global goods |
Photoelectric switch | 24V NPN Swiss delight |
Proximity switch | Korea Autonics |
U type velocity measuring eye | OMRON |
| Solid-state relay | Switzerland Carlo |
Air switch | chint |
| AC contactor | chint |
Thermocouple | Insulation type K Taiwan reach |
Button switch | Schneider |
Advantages
1. Energy-saving, lead-free application, meet with environmental protection requirement and user friendly designed
2. Automatic power system, inverter control, automatic board in-load feature.
3. Flux sprayer using transverse Japanese spray nozzle and driving by pneumatic cylinders. PLC controlled, accurate and reliable.
4. Preheating system uses three independent temperature control so as to ensure the excellent heat preservation, temperature uniformity, temperature accuracy in ±2ºC.
5. Titanium solder fingers, high strengthened double v-groove with tin resistant
