Shenzhen Jaguar Automation Equipment Co., Ltd
Shenzhen Jaguar Automation Equipment Co., Ltd
Add to Cart
Jagaur Top 8 Pick and place machine
| Model | Jaguar TOP-10H |
| Placement Speed | 35000CPH |
| Placement Accuracy | ±0.05mm |
| Machine Size(L×W×H) | 1500×1200×1500mm |
| Dimension of PCB | 60×60~1200×350mm |
| The thickness of PCB | 1-4mm |
| Feeder lanes | 30 |
| Mounting Head Number | 8 |
| The Range of Components | 0603/0402~20×20mm IC(SOT,SOP,QFP ect.) |
| Position Way | Image recognition + Algorithm Compensation |
| Picking Way | Picking at the same time |
| Electronic Parameter | Single -Phase 220V AC 50HZ2.5KVA |
| Air Source Requirement | Dry air 0.45Mpa~0.6Mpa 50L/min |
Feature:
【technical parameters】
○ Number of feeders:68pieces
○ Number of mounting head:8head
○ Number of pallets:8pieces
○ Average power:500W
○ positioning accuracy:0.01mm
○ Nozzle buffer range:4.5mm
○ Power Supply:220V, 50Hz
○ Compressed air: 0.5-0.6Mpa
○ Drive motor: Panasonic servo motor /HW-QiGn stepper motor
○ Identification mode: six head synchronous identification
○ Suction nozzle vacuum source:High speed on-off vacuum generator with vacuum destruction
○ Maximum board area:625×455mm
○ XY maximum range of motion:629×679mm
○ Z axis maximum range:20mm
○ Belt feeder: 8, 12, 16, 24mm and vibration feeder (can be attached to the chip)
○ Maximum theory speed: 25000 Pcs/ hours
○ LED, resistance capacitance actual patch speed: 12000 Pcs/ hours
○ Hybrid visual mount average patch speed 8500Pcs/ hours
○ XYZ drive rail: TBI high precision heavy duty linear guide rail.
○ Motion drive system: Panasonic AC servo -A6 driver
○ Operating system: Based on the Windows operating system, China JAGUAR record company independent research and development automatic placement machine operating system, support Windows XP, win7 operating system
○ Component angle: 0-360 degrees at any angle, the movement of synchronous rotation
○ X/Y mode of operation: QiGn-2017 version of intelligent curve acceleration and deceleration linkage system
○ MARK point positioning: automatic scanning (can be arbitrarily set MARK points)
○Intelligent alarm: automatic correction, Automatic patch, lack of material alarm
○Into the plate mode: single segment from left to right transmission, can be connected to the automatic connection platform system, automatic PCB transmission positioning. Thimble positioning, manual release plate.
○ Visual display: 17 inch industrial control display ratio 4:3 resolution 1280x1024
○ Programming mode: peer to Peer programming, visual programming, PCB file import, etc.
○ Optimization mode: three automatic optimization modes (including V2017 intelligent optimization)
○ To identify the number of cameras: a Mark recognition camera, six high speed identification camera, a high resolution precision recognition camera
○ Applicable scope:adapt 0402, 0603, 0805, 1206, two tubes, transistors, SOT, and 40*40mm in the range of pin spacing is greater than or equal to 0.3mm (0.5mm from the QFP BGA pin center), etc..
○ Product weight:500KG
○ Size (length and width): 1450*1370*1350mm (without display and keyboard)