Wave Soldering N350,High- End Lead Free Dual Wave Wave Soldering Machine ,Reflow Soldering Machine
Specification:
| Model No. | JAGUAR N350 | JAGUAR N450 |
| Number of heating zones | 3 | 4 |
| Length of heating zones | 1650mm | 2000mm |
| Total/running power | 20KW/6-8KW | 25KW/8-10KW |
| Air supply | 0.5MPa |
| Preheating method | Hot air or Infrared, hot air, combination |
| Preheating power | 220V 6KW | 220V 8KW |
| Control method | PC +PLC/Touch screen/Keyboard | PC +PLC |
| Range of temp. control | Room temperature---300ºC |
| Preheating time | About 10-15mins for setting 150ºC |
| Solder type | Lead-free / Sn-Pb |
| Solder pot capacity | 320KG | 420KG |
| Solder pot temperature | 300ºC | 300ºC |
| Solder pot material | Cast iron enamel/Titanium alloy/316 stainless steel | Cast iron enamel(standard) |
| Heating emitter power | 380V 6KW | 380V 8KW |
| Solder temp. control method | PID+SSR | PID+SSR |
| Wave crest drive power | 1KW 220V | 1KW 220V |
| Wave crest height Control | Frequency converter |
| Warm-up time of solder | About 180mins for setting 250ºC |
| PCB width | 50-350mm |
| Component clearance | Top 120mm(option 160mm) Bottom 15mm |
| Convey speed | 0-1800mm/min | 0-2000mm/min |
| Convey height | 750+/-20mm |
| Convey direction | L→R (R→L optional) |
| Convey angle | 4-7 º |
| Convey width adjustment | Manual |
| UPS | Option |
| Nitrogen structure | Option |
| Flux pressure/capacity | 3-5 bar/6.5L |
| Weight | 1300KG | 1600KG |
| Power Requirement | 3P5W,380/220V 50Hz 63A |
| Dimensions | 3900(L)*1400(W)*1650(H) | 4300(L)*1400(W)*1650(H) |
1.01 The whole machine is controlled by Siemens PLC + industrial control machine + temperature control module, which is stable and reliable
1.02 Powerful control software, running on Windows 7 system, can switch between Chinese and English at any time
1.03 Spray movement is controlled by stepper motor
1.04 Japanese lacquer nozzle, adjustable spray area and depth
1.05 Flux manual supply system, maintain constant flux supply
1.06 Complete flux recovery and exhaust filtration system, environmentally friendly
1.07 Three-stage hot air preheating zone with a total length of 1650mm, PID temperature control method
1.08 Heater modular design, easy maintenance
1.09 Molded curved tooth impeller, patented nozzle design, realize ultra-low oxidation
1.10 Tin furnace liner is made of titanium alloy
1.11 Sibo economic operation mode, less oxidation, energy saving
1.12 All titanium alloy chain claw, resistant to corrosion and high temperature, never deformed
1.13 Adjustable shock wave crest and intensive flat wave width to save energy and reduce oxidation
1.14 Dual cooling zone design, adopting forced cooling method of upper and lower fans, optional forced water cooler
1.15 Equipped with new 2.0 titanium alloy double hook, aluminum alloy rail anti-deformation structure design
1.16 Manually adjust the width of the substrate; the conveying angle can be adjusted
1.17 The transportation speed is controlled by frequency converter, stepless speed regulation
Ranch
2.00 Overall technical parameters
2.01 Control method: computer + PLC
2.02 Transportation motor: 1P AC220V, 60W
2.03 Transport speed: 0-2000mm / min
2.04 substrate size: 30-350mm (W)
2.05 Flux capacity: 6L
2.06 Pre-heating zone: 1650mm three-stage PID full hot air independent control, room temperature ~ 250 ℃
2.07 Tin furnace heating: 1KW * 9PCS room temperature ~ 300 ℃
2.08 wave height: Approx.12mm
2.09 Tin furnace capacity: 320KG
2.10 Wave motor: 3P AC220V, 0.18KW * 2PCS
2.11 Claw washing pump: 1P AC220V 6W
2.12 Transport direction: L → R (R → L optional)
2.13 Welding angle: 3-6 °
2.14 Flux pressure: 3-5 BAR
2.15 Power supply: AC380V 50HZ / 60HZ
2.16 Normal operating power / total power: 8KW / 30KW
2.17 Dimensions: 3200 × 1420 × 1750mm
2.18 Body size: 3900 × 1420 × 1750mm
2.19 Net weight: 1800KG
